Creme Bicycle Spécifications télécharger pdf (Page 17)

If your bicycle has disc brakes and standard fork ends, and for any reason does

not have special safety washers please do not ride the bicycle and contact us im-

mediately.

Reference bolt tightening torque values (please always refer to the manufacturer’s

instruction manual rst, the values shown below do not apply to ALL types of

components that may be mounted on the bicycle):

Bolt type: Tightening torque (N-m):

Stem steer tube bolt 16

Stem handlebar bolts 14

Front hub axle bolts 17 (for 10mm axle hubs)

Rear wheel bolts/nuts 35

Crank to bottom bracket bolts 40

Seat binder, Seat post clamp bolts M5 10

Seat binder, Seat post clamp bolts M6 12

Pedals 25

Brake calliper screws to frame and fork 10

Shifting lever, Brake lever 3

Disc brake screws to hub 6.0

Rear derailleur: main ﬁxing bolt 10

Rear derailleur: cable ﬁxing bolt 5

Bolts in seat post clamp: M5 15

M6 20

13mm or 14mm nut 25

mounting bolts that secure the rack to the fork 7

ADJUSTMENTS

It is possible to make some adjustments to your bicycle that will inﬂuence your riding

position. These adjustments can make a great diﬀerence to riding pleasure, speed and

safety. Unless you are a very competent cyclist and mechanic, do not attempt to execute

any of these adjustments yourself. Seek advice at your local bicycle shop. The basic ad-

justment points are listed below:

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Pas de commentaire

Creme Bicycle Spécifications Page 17