Creme Bicycle Spécifications télécharger pdf (Page 6)

ASSEMBLY OF THE NEW BICYCLE:

This should always be carried out by the dealer where you purchased your bicycle. If

you buy a bicycle that is disassembled, or only partially assembled the warranty

will be void. Assembly should be done in your presence, in order to make the necessary

adjustments correctly, such as saddle height, handlebar angle and stem height. It is also

important to note that even if the bicycle is built up perfectly when new, it will need

some additional adjustments a few weeks (or around 50km) later. You should visit your

dealer and ask him to check the bicycle for you after this period. This is essential to keep

your warranty.

TOOLS REQUIRED:

4mm, 5mm, 6mm, 8mm allen keys, 8mm, 15mm open end wrench, Torx 25 wrench,

Philips head screwdriver, Pliers with cable cutting ability, Torque wrench

min. 5 cm paved surface

CORRECT FRAME SIZE:

To check if the frame size is safe, the rider should straddle the bicycle while wearing

the kind of shoes which will be used for riding and stand straight with feet at on the

ground. The minimum distance between the rider’s crotch and top tube should be 5

cm (approx. 2 inches). This method of measuring the correct frame size does not apply

to bicycles with step-through frames, or so called “lady” frames. In case of these frames,

correct frame size should be determined ﬁrst on a traditional diamond frame (so called

“men’s” frame).

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Pas de commentaire

Creme Bicycle Spécifications Page 6